AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
AltRider 30 mm Block Handlebar Riser
Tenere 700

AltRider 30 mm Block Handlebar Riser

ALTR-2-2003

$110.36
/
Shipping calculated at checkout.
  • Free Shipping USA
  • In stock, ready to ship

• Better Posture: Raising the handlebars 30mm reduces shoulder and back strain, so you stay comfortable on long rides.
• No Cable Work: Designed to work with OEM wiring and brake/clutch cable lengths — no extensions or rerouting needed.
• Stays Secure: Offset clamp geometry prevents the bars from rotating under load, and stainless socket head screws resist corrosion over time.

X5_69Wb8ddE

• Material: 6061 billet aluminum
• Finish: Matte black anodized, bead blasted
• Rise: 30mm
• Hardware: Stainless steel socket head screws
• Installation: 4-bolt
• Weight: 0.6 lbs
• Dimensions: 3 × 2.5 × 1.5 in

Any bike with a stock 1-1/8" handlebar, parallel OEM bar clamps, and open mounting area, sized for M8 bolts

Cannot be installed on bikes with angled (e.g. V-shaped) OEM bar clamps; cannot be installed where OEM clamping bases are offset (bases must be level)

Thirty millimeters of additional bar height changes how a big adventure bike feels on a long day riding standign up. Your back comes up, your shoulders open, and fatigue builds slower. That is the job these risers do.

They fit any bike running a stock 1-1/8" handlebar with parallel OEM bar clamps and open mounting area. Installation is four bolts. OEM wiring and brake and clutch cable lengths are not affected — no extensions, no rerouting.

AltRider recommends pairing these with adventure foot pegs and a DualControl Brake System if you are focused on ergonomics and ridability. The combination will set you up for long rides both sitting down and standing up.

Always verify that your clutch cable and brake lines have enough slack before installing any handlebar riser.

Install Instructions for the Handlebar Risers: ▶

Install Instructions for the Handlebar Risers:

• Better Posture: Raising the handlebars 30mm reduces shoulder and back strain, so you stay comfortable on long rides.
• No Cable Work: Designed to work with OEM wiring and brake/clutch cable lengths — no extensions or rerouting needed.
• Stays Secure: Offset clamp geometry prevents the bars from rotating under load, and stainless socket head screws resist corrosion over time.

Thirty millimeters of additional bar height changes how a big adventure bike feels on a long day riding standign up. Your back comes up, your shoulders open, and fatigue builds slower. That is the job these risers do.

They fit any bike running a stock 1-1/8" handlebar with parallel OEM bar clamps and open mounting area. Installation is four bolts. OEM wiring and brake and clutch cable lengths are not affected — no extensions, no rerouting.

AltRider recommends pairing these with adventure foot pegs and a DualControl Brake System if you are focused on ergonomics and ridability. The combination will set you up for long rides both sitting down and standing up.

Always verify that your clutch cable and brake lines have enough slack before installing any handlebar riser.

• Material: 6061 billet aluminum
• Finish: Matte black anodized, bead blasted
• Rise: 30mm
• Hardware: Stainless steel socket head screws
• Installation: 4-bolt
• Weight: 0.6 lbs
• Dimensions: 3 × 2.5 × 1.5 in

Any bike with a stock 1-1/8" handlebar, parallel OEM bar clamps, and open mounting area, sized for M8 bolts

Cannot be installed on bikes with angled (e.g. V-shaped) OEM bar clamps; cannot be installed where OEM clamping bases are offset (bases must be level)

Install Instructions for the Handlebar Risers: ▶

Install Instructions for the Handlebar Risers:

×
×

RELATED PRODUCTS

AltRider Handlebar System with AMPS for KTM Models
from $98.56
AltRider Decal Kit for the KTM 1190 Adventure / R
from $1.25
AltRider Handlebar System with AMPS for Yamaha Tenere 700
from $98.56
AltRider Uprated Side Stand Return Spring w/Spring Puller for Yamaha Tenere 700 OEM Side Stand
from $10.76
AltRider DualControl - 22mm Riser for KTM / Husqvarna Models - Black
$28.97
AltRider DualControl Brake System for KTM / Husqvarna / Norden 901 Models
from $40.76
AltRider Stainless Steel Headlight Guard for KTM 790/890 Adv / R (2019-2022) - Silver
$150.00
AltRider Luggage Rack for KTM 790/890 Adventure/R and Husqvarna Norden 901
$216.17
  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
R
Ryan Harder

Top quality product. Fit and finish are so much nicer than other brands. The risers took the pain out of my shoulders while making stand up riding much more comfortable.